Chapter: 3
Section:
Page
7
MACHINE PARAMETERS
3.3.2 PARAMETERS FOR THE AXES
The VNP400 has 4 groups of machine parameters to associate the DRO with each
axis.
The meaning of all groups is the same and its numbering consists of three digits where
the first one indicates the axis number and the other two the parameter number.
The “x” in the numbering of parameters used here replaces the first digit and it indicates
that the same parameter explanation is good for all 4 axes. Thus, Px00 must be
interpreted as explanation for parameters P100, P200, P300 and P400.
Px00
Indicates the name associated with the corresponding axis. It may consist of a
letter or a letter with a subindex. For example: A, A
B
, X, X
0
, etc.
The possible characters to be used are shown in a window and they can be
selected by using the
and
keys.
After selecting each character, press
to validate it.
The
key will delete the last validated character and the
key will
delete all selected characters.
The first character associated to an axis must be a letter and it cannot be a T since
this is used to name tools.
Px01
Indicates whether the axis display shows only its actual reading or the result of an
operation between axes.
NO
Displays the actual reading of the axis.
ADD
Displays the result of adding the readings of two axes.
SUB
Displays the result of subtracting the readings of two axes.
PARAMETERS FOR THE
AXES
Summary of Contents for VNP400
Page 1: ...FAGOR VNP400 Ref 9506 in...
