Page
Chapter: 4
Section:
DRO MODE OF OPERATION
20
4.5 CLOCK FUNCTION
This function makes a clock available for various applications such as timing the
execution of parts.
To access the clock function, follow these steps:
*
Press
*
Select the “CLOCK” option.
The DRO will display the current time in hours . minutes . seconds.
The functions appearing to the right of the monitor which can be selected with softkeys
F1 thru F5 are:
RESET To reset the clock (00.00.00).
PRESET
To preset the clock with the desired time.
The DRO will request the desired time. Key it in from the keyboard and press
.
ON/OFF To display or not the clock in the upper right-hand side of the screen.
This new clock will be displayed in all display modes.
The clock will keep timing even while not being displayed in the upper right-hand
side of the screen. Just access the “CLOCK FUNCTION” to check its time.
EXIT Exits the clock function. The DRO will return to the standard display mode.
Note: The clock will be reset to 00.00.00 every time the DRO is turned off and back
on.
CLOCK FUNCTION
Summary of Contents for VNP400
Page 1: ...FAGOR VNP400 Ref 9506 in...
