Chapter: 2
Section:
Page
1
MACHINE AND POWER CONNECTION
2.
MACHINE AND POWER CONNECTION
The DRO should be installed away from damaging elements such as coolants, chemical
products, blows, etc. whenever possible.
It is recommended to keep the DRO away from any device generating a strong
magnetic field which could cause undesirable image fluctuations on the monitor.
2.1 POWER CONNECTION
The FAGOR DRO model VNP400 has on the rear panel a three-prong connector for power
and ground connection.
It can be connected to an A.C. voltage between 100V and 240V (+10% and -15%).
POWER CONNECTION
Summary of Contents for VNP400
Page 1: ...FAGOR VNP400 Ref 9506 in...
