Chapter: 2
Section:
Page
17
MACHINE AND POWER CONNECTION
When a positive sign is selected, the position value shown by the DRO will be
the real axis position plus the value indicated in the field corresponding to the
selected tool.
When a negative sign is selected, the position value shown by the DRO will be
the real axis position minus the value indicated in the field corresponding to the
selected tool.
To cancel the definition of a tool compensation, press
.
*
Press
.
The DRO assumes the selected type of tool compensation for that axis and it will
display, next to the axis position, the indicator “TL+” or “TL-” when working with
tool length compensation and the indicator “TR+” or “TR-” when working with tool
radius compensation.
*
Repeat these operations for the rest of the axes.
Note:
When a zero setting (RESET) or a position preset (PRESET), is carried out, the
DRO will assign this value to the compensated position value (coordinate).
TOOL COMPENSATION
Summary of Contents for VNP400
Page 1: ...FAGOR VNP400 Ref 9506 in...
