Chapter 2: Safety Information
18
EVS5200_DOC_SOP_DS850
Water and Moisture
Cleaning
Follow the instructions in the
cleaning the DS850. Use only the cleaning solutions approved by ES&S. Cleaning
instructions are also provided in the
DS850 System Maintenance Manual
.
Heating
Do not install this product near heat sources such as radiators, air ducts, areas subject to
direct sunlight, or other products that produce excessive heat.
Power Cord Protection
Route or install the power supply cord for this product in such a manner to protect it
from being walked over or pinched. Make sure you power down the unit completely
before connecting or disconnecting the power cord. Before moving the unit, shut down
and power off the DS850, and then turn off the UPS. The UPS should be unplugged
from the wall outlet and safely stowed before moving. You should take care not to pinch
the power cord when locking the power switch access door.
Servicing
Damage Requiring Service
Unplug the DS850 and call ES&S to consult a qualified service technician under the
following conditions:
When the power cord is damaged.
If liquid has been spilled into the scanner casing.
If the scanner does not function normally while following instructions in this manual.
Warning:
Do not place containers with liquids such as coffee, water, or soda on or
around the DS850. Do not operate the equipment in a damp environment. Store the
DS850 in a cool, dry place.
Electrical Hazard:
Electrical Shock Danger: Do not attempt to service the scanner
unless specifically instructed to do so by ES&S. Do not attempt to gain access to
areas of the unit where dangerous voltages are present. Only qualified ES&S
technicians should service the DS850.
