Chapter 5: Pre-Election Day Tasks
58
EVS5200_DOC_SOP_DS850
If an election definition has
been loaded on the scanner
and User Access is disabled,
the screen that appears when
the scanner is started is the
Scan Ballots screen. If you are
ready to scan ballots, place the
ballots in the input tray and
press
Start
. The following is an
example of the Scan Ballots
screen.
Select a Precinct
If an election is
By Style
or if the Processing Mode is set to
Single Precinct
, you must
select a precinct before you can scan ballots.
Follow the steps below to select a precinct:
1.
Press
Select Precinct
.
2.
Enter the precinct number or
name and then press
Search
or
just press
Search
.
Note:
If the election is
By Style
or if the Processing Mode is set to
Single Precinct
, you will
have to select a precinct before you can begin scanning the ballots. See
for
more information. If the Processing Mode is set to
Mixed Precinct
, you will not need to select
a precinct before you can scan ballots. The
Select Precinct
button will be the only available
button until you select a precinct.
Reference:
See
for the steps to follow to perform the procedure. See
for instructions on selecting a precinct.
Reference:
for an
example of the Scan Ballots
screen showing the
Select
Precinct
button.
