ES&S DS850 Operator'S Manual Download

Page: 88 / 199

Chapter 5: Pre-Election Day Tasks

EVS5200_DOC_SOP_DS850

Software Version 2.10

Published: February 26, 2014

On the Results Access screen
press

Edit

to update your option.

Enter the Administration
Code.

Select one of the following options:

•

Unlocked

- Results Report and vote process options are available.

•

Locked

- The following options are restricted from use:



The Reports selection screen option - Results Report



Results menu screen options

•

Export Results

•

Export Files

•

Backup menu screen option - Collection

Press

Save

to save your current option.

Note:

If the user attempts to use any of the locked functions they will receive a message

informing them that these options are unavailable.

Summary of Contents for DS850








































































































































































































Search results

Summary of Contents for DS850

Reviews:

Related manuals for DS850

Brands by name

Popular brands

ES&S DS850, Operator'S Manual

Search results

Summary of Contents for DS850

Reviews:

Related manuals for DS850

Brands by name

Popular brands