Erbe ERBOTOM ICC 350 M, Instruction Manual

Page: 93 / 100

12-5
85 No pulse current Check whether there was an interruption in the
connecting cables or whether the active or neutral
electrode was not applied
86 No pulse current Check whether there was an interruption in the
connecting cables or whether the active or neutral
electrode was not applied. If neither of these errors
was found, then please contact the Technical Service
87 Pulse current too low, however still
within tolerance limits
88 Maximum time limit exceeded Reactivate if necessary
89 The Neurotest is already activated when
the unit is switched on Always switch on unit and activate after the automatic
self check and confirmation of the front panel setting
90 Electronic fuse for prevention of
unpermissibly high currents is triggered Please notify the Technical Service
91 Technical error Please notify the Technical Service
CAUTION
This error list contains error descriptions relevant only to the operator. Errors that concern the Technical
Service are described in the technical service documentation.