Erbe ERBOTOM ICC 350 M, Instruction Manual

Page: 54 / 100

7-4
Programmability
Program n = MIN Custom programmable by the user
Program "C" = MIC Custom programmable by the user
Programming Via key on the front panel
Program storage Via key on the front panel
Calling up program Via key on the front panel
Compressed air terminal
Required pressure 5 ± 1 bar
Program n = MIN (Minimally Invasive Neurosurgery)
The “n” program is intended for operating MIN probes on the MIC
connecting socket. In this program, the parameters for these probes
can be set. Functions that are irrelevant or even impermissible for
the operation of such instruments are limited or switched off
according to the instrument.
Settings
(e.g. for instrument 1)
The limitations for other instruments are described in the respective Notes on use.)
AUTO CUT The HF power output for cutting with the instrument can be limited in 1
watt steps from 15 watts to 1 watt.
EFFECT can be set from 1 to 4.
AUTO CUT is blocked for electrode handles with 2 keys that are
connected to the CUT/COAG 1 socket.
AUTO COAG 1 This function field is not limited and all parameters can be set.
AUTO COAG 2 The HF power output for SOFT can be limited in 1 watt steps from 15
watts to 1 watt. FORCED and SPRAY are blocked.
Activation of AUTO STOP during SOFT is possible.
Electrode handles with 2 keys that are connected to the CUT/COAG 2
socket cannot activate the unit.
AUTO BIPOLAR This function field is not limited and all parameters can be set.
7.4 Technical data