Basic Operations
89
1. After checking that the printer is ready, press the
button and the
Z
button.
2. Check that the trailing edge of the printed media is fed to a position over the cutter
groove, and open the front cover.
If you have printed the amount of media remaining, press the
u
button to rewind the
media so that this information will remain on the roll after the media is cut.
c
Caution:
The heaters and media holding plate may be hot; observe all necessary precautions.
Failure to observe the necessary precautions could result in burns.
When cutting media, be careful not to cut your fingers or hands with the cutter or other
blades.
