Basic Operations
50
Normal printing
❏
Use low pressure rollers. Move the high pressure rollers right or left until they
contact the ends.
❏
We recommend setting the low pressure rollers within 5 mm (0.20 inch) of the
edges.
❏
Position the remaining low pressure rollers within the black square labels. There
may be extra low pressure rollers depending on the media width. Position the extra
low pressure rollers away from the black square labels.
When transparent or white film is loaded or during ink layering
❏
Use high pressure rollers only.
❏
We recommend positioning the rollers within 10 mm (0.39 inch) from the left and
right edges of the media.
❏
Position the low pressure rollers away from the black square labels.
Note:
To avoid getting grease on your skin, do not touch the shaft (gray part in the figure) at the
top of the roller.