Epson SureColor S50675 User Manual Download Page 135

Page: 135 / 255

Maintenance

135

❏

Do not get alcohol or water on the caps or the nozzle surface. Ink congeals when mixed
with water or alcohol.

❏

Touch a metallic object before starting work to discharge any static electricity.

Moving the Print Head

This section describes how to position the print head for part cleaning.

1. Confirm that the printer is ready and press

The Maintenance menu is displayed.

2. Use the

buttons to select Head Maintenance and press the

button.

The print head moves to the cleaning position.

Important:
Be sure to follow the steps below when positioning the print head. Moving the print head
manually could cause malfunction.

Summary of Contents for SureColor S50675
































































































































































































































































Search results

Summary of Contents for SureColor S50675

Reviews:

Related manuals for SureColor S50675

Brands by name

Popular brands

Epson SureColor S50675, User Manual

Search results

Summary of Contents for SureColor S50675

Reviews:

Related manuals for SureColor S50675

Brands by name

Popular brands