manualshive.com logo in svg

Epson SureColor S50675, User Manual

The Epson SureColor S50675 is a high-quality large-format printer that combines speed, precision, and vibrant color reproduction. To make setup and operation a breeze, be sure to download the free Quick Reference Manual from our website to access detailed instructions and optimize your printing experience.

Share
Download
background image

Maintenance

168

4. Check again to confirm that a fresh waste ink bottle is correctly placed and then press 

the 

Z

 button to reset the waste ink counter.

For information on the disposal of used waste ink bottles, see “Disposal of Used 
Consumables” on page 179.

Replacing the Wiper and Wiper Cleaner

Before starting this procedure, be sure to read “Maintenance Precautions” on page 134.

1. Position the print head for maintenance. See “Moving the Print Head” on page 135.

2. After the print head moves to the left end of the printer, open the right maintenance 

cover.

3. Remove the wiper cleaner.

Important:
Be sure to confirm that the waste ink tube is inserted in the mouth of the waste ink bottle. 
Ink will spill onto the surrounding area if the tube is not inserted in the bottle.

Important:
Leave the used wiper cleaner and wiper that have been removed on the metal tray until they are 
disposed of. If such a part is directly placed on the printer, it may leave stains that may be difficult 
to remove due to the characteristics of the ink.

Summary of Contents for SureColor S50675
































































































































































































































































Reviews:

No comments

Related manuals for SureColor S50675

Sekonic SPL-450 Instruction Manual preview
SPL-450
Brand: Sekonic Pages: 28

Brands by name

Popular brands

Load more brands