manualshive.com logo in svg

Epson SureColor S50675, User Manual

The Epson SureColor S50675 is a high-quality large-format printer that combines speed, precision, and vibrant color reproduction. To make setup and operation a breeze, be sure to download the free Quick Reference Manual from our website to access detailed instructions and optimize your printing experience.

Share
Download
background image

Using the Control Panel Menu

211

The Maintenance Menu

The Maintenance menu can be accessed directly by pressing the 

#

 button.

Item

Parameter

Explanation

Nozzle Check

Print

A nozzle pattern will be printed. Inspect the pattern visually and 
perform head cleaning if you detect faint or missing colors. 

See

 

“Checking for Clogged Nozzles” on page 181.

The options available vary with the option selected for 

Media Size 

Check

 and the width of the media used.

Print At Right

Print At Center

Print At Left

Cleaning

All Nozzles

Execute (Light)/
Execute (Medium)/
Execute (Heavy)

The options displayed vary with the printer model.

Note the numbers of patterns that contain faint or missing colors and 
clean all or selected nozzles. Select 

All Nozzles

 to clean all nozzles (or all 

nozzles in the selected print head). Choose 

Selected Nozzles

 to clean 

only the nozzles in selected arrays. 

The level of cleaning can be selected from 

Execute (Light)

, 

Execute 

(Medium)

, and 

Execute (Heavy)

. Select 

Execute (Light)

 first. If the 

problem persists after you have used 

Execute (Light)

, choose 

Execute 

(Medium)

. If the problem persists after you have used 

Execute 

(Medium)

, choose 

Execute (Heavy)

. See

 

“Head Cleaning” on page 183.

Head 1/Head 2

2

Head 1

2

Head 2

2

Selected Nozzles

Execute (Light)/Execute 
(Medium)/Execute 
(Heavy)

Head Maintenance

Move Head

Position the print head for maintenance. Perform such maintenance as 
cleaning the wiper, caps, and the area around print head only after 
using this option to position the head for cleaning. Moving the print 
head manually could cause malfunction. See

 

“Regular Cleaning” on 

page 137.

Waste Ink Counter

-

If you replace the waste ink bottle before being prompted by a message 
in the control panel, run the Waste Ink Counter after replacement. 

Ink Circulation

1

Circulate spot color ink to prevent sedimentation in the print head or 
tube. This function is available when avoiding an operation interrupt by 
the auto ink circulation function of the printer.

Ink Refresh

All Nozzles, 
All (except MS/WH)

4

, 

All (except WH)

1

, 

MS/WH

4

, WH

1

This function is available when tint unevenness (areas of uneven 
density) are detected in printing results.

The displayed menu varies depending on your model or the specified 
color mode.

See

 

“Ink Refresh” on page 188.

Head Washing

XX/XX

3, 4

, Head1 

XX/XX

2

, Head 2 XX/XX

2

, 

Head1 All Nozzles

2

, 

Head2 All Nozzles

2

, All 

Nozzles

(XX indicates an ink 
color code.)

Use this function if nozzle clogs cannot be cleared even after 
performing head cleaning several times or cleaning around the print 
head.

The displayed menu varies depending on your model or the specified 
color mode. For details, see “Head Washing” on page 186.

Pre-Storage Maint.

WH/MS

4

WH

1

All Nozzles

Always perform pre-storage maintenance if the printer will not be used 
for an extended period (and switched off). If the storage interval is short, 
you can perform pre-storage maintenance for spot color ink only. 

See “Long-Term Storage (Pre-Storage Maintenance)” on page 189.

Summary of Contents for SureColor S50675
































































































































































































































































Reviews:

No comments

Related manuals for SureColor S50675

Brands by name

Popular brands

Load more brands