Epson SureColor S50675 User Manual Download Page 122

Page: 122 / 255

Basic Operations

122

Feed Adjustment

1. Press the

button during printing.

The current adjustment value is displayed.

2. Use the

buttons to change the current value.

If the feed amount is too small, black bands (dark stripes) will appear; adjust the feed
amount upward.

If, in contrast, the feed amount is too large, white bands (pale stripes) will appear; adjust
the feed amount downward.

3. Check the printing result. If you are not satisfied with the results, use the

buttons to

change the value.

This updates the setting value of Feed Adjustment in the currently selected media
settings.

4. Press the

button to exit the menu.

Note:
The time needed for the heaters to reach the specified temperatures varies with the
ambient temperature.

Summary of Contents for SureColor S50675
































































































































































































































































Search results

Summary of Contents for SureColor S50675

Reviews:

Related manuals for SureColor S50675

Brands by name

Popular brands

Epson SureColor S50675, User Manual

Search results

Summary of Contents for SureColor S50675

Reviews:

Related manuals for SureColor S50675

Brands by name

Popular brands