Introduction
13
Front Section - S30675
1 Maintenance cover (left)
Open this cover to clean the area around the print head. Normally closed when using the printer.
See
“Cleaning Around the Print Head (Daily)” on page 137.
2 After heater
The heater can be used to rapidly dry ink after printing.
See “Heating & Drying” on page 114.
3 Roll core holder
Place the roll core for media take-up on these holders. There are two holders: one on the left and one on the right.
See“Loading and Exchanging Media” on page 38.
4 Tensioner media guide
The tensioner media guide prevents the take-up roll from skewing when using the auto take-up reel unit. When not using the
auto take-up reel unit, move the guide out of the way toward both edges of the tensioner.
5 Tensioner
The tensioner maintains tension to prevent the media sagging as it is taken up. See “Using the Auto Take-up Reel Unit” on
page 92.
6 Roll core holder locking screw
The locking screws keep the roll core holders in place once they have been attached to the roll core. There are two locking
screws: one on the left and one on the right.
