Epson SureColor S50675 User Manual Download Page 243

Page: 243 / 255

Appendix

243

Use a shielded twisted pair cable (category 5 or better).

For additional print drying system included with the S50675.

Media system installed; ink cartridges not included

Temperature

Operating: 15 to 35 °C/59 to 95 °F (20 to 32 °C/68 to 89 °F recommended)

Storage: -20 to 40°C (-4 to 104

F) (within a month at 40°C or 104

Humidity

Operating: 20 to 80% (40 to 60% recommended) (without condensation)

Storage: 5 to 85% (without condensation)

Dimension

Storage (minimum) dimensions: 2620 (W) × 963 (D) × 1311 (H) mm or 103.2 (W) ×
37.9 (D) × 51.6 (H) inches

Maximum dimensions: 2620 (W) × 1259 (D) × 1650 (H) mm or 103.2 (W) × 49.6 (D)
× 65.0 (H) inches

Weight

S70675: Approx. 229 kg (504.8 lb)

S50675: Approx. 238 kg (524.7 lb)

S30675: Approx. 219 kg (482.8 lb)

Ink Specifications

Type

Special ink cartridges

Pigment ink

S70675: Black, Cyan, Magenta, Yellow, White, Metallic Silver, Light Black, Orange
Plus, Light Cyan, Light Magenta

S50675: Black, Cyan, Magenta, Yellow, White

S30675: Black, Cyan, Magenta, Yellow

Use by date

See the date printed on the package (at normal temperature)

Print quality guarantee expiry

Six months (from date package containing ink cartridge is opened)

Storage temperature

Uninstalled:
-20 to 40 °C (-4 to 104 °F) (within a month at 40°C or 104 °F)

Installed:
-10 to 40°C (14 to 104 °F) (maximum four days at 40°C or 104 °F))

Transporting:
-20 to 60°C (-4 to 140 °F)
(within a month at 40°C or 104 °F, within 72 hours at 60°C or 140 °F)

Cartridge dimensions

(W) 40 x (D) 305 x (H) 110 mm or (W) 1.6 x (D) 12.0 x (H) 4.3 inches

Capacity

White: 600 ml

Metallic Silver: 350 ml

Other colors: 700 ml

Important:
Do not refill the ink cartridges.

Printer Specifications

Summary of Contents for SureColor S50675
































































































































































































































































Search results

Summary of Contents for SureColor S50675

Reviews:

Related manuals for SureColor S50675

Brands by name

Popular brands

Epson SureColor S50675, User Manual

Search results

Summary of Contents for SureColor S50675

Reviews:

Related manuals for SureColor S50675

Brands by name

Popular brands