Home
/
Epson
/
SureColor S50675
/
User Manual

Epson SureColor S50675, User Manual, Page: 160 / 255

Share

Page: 160 / 255

Epson SureColor S50675 User Manual Download Page 160

Maintenance

160

1. Position the print head for maintenance. See “Moving the Print Head” on page 135.

2. Dampen a new cleaning stick with ink cleaner. See “Using Ink Cleaner” on page 136.

3. Clean the top surface of the flushing pad.

Wipe lint and dust with the tip of a cleaning stick.

If the ink has solidified and lint and dust cannot be removed, we recommend
exchanging the flushing pad with a new one. See “Replacing the Flushing Pad” on page
172.

4. Close the maintenance cover and press the

Z

button twice.

The menus will close when the print head returns to its normal position.

See “Disposal of Used Consumables” on page 179.

Important:
Do not deform the metal section of the top surface. Otherwise, it may damage the print
head.

«
...
158
159
160
161
162
...
»

Summary of Contents for SureColor S50675
































































































































































































































































Reviews:

No comments