manualshive.com logo in svg

Epson SureColor S50675, User Manual

The Epson SureColor S50675 is a high-quality large-format printer that combines speed, precision, and vibrant color reproduction. To make setup and operation a breeze, be sure to download the free Quick Reference Manual from our website to access detailed instructions and optimize your printing experience.

Share
Download
background image

Maintenance

181

Other Maintenance

Checking for Clogged Nozzles

We recommend that you check the nozzles for clogs each time you print to ensure quality 
results.

There are three ways to check for clogs.

❏

Auto Nozzle Check

The printer automatically checks for clogs at specified intervals by scanning a test 
pattern with a sensor as it is being printed. If a clog is detected, the printer will perform 
a pre-selected option, either Stop Printing or Continue Printing.

See “The Printer Setup Menu” on page 208.

❏

Print Nozzle Pattern

At specified intervals, the printer prints a test pattern at the start of normal printing. 
When printing is complete, you can visually inspect the pattern to determine whether 
there may be faint or missing colors in the preceding or following printout.

Use Print Nozzle Pattern with media not suited to Auto Nozzle Check or if you feel 
that Auto Nozzle Check would take too long.

See

 

“The Printer Setup Menu” on page 208.

❏

On-Demand Nozzle Pattern

Nozzle patterns can be printed as required and inspected visually to determine whether 
the nozzles are clogged.

Note:
Auto Nozzle Check is not available under the following conditions:

❏

White ink is used in10 color mode (S70675) or 5 color mode (S50675). The check can 
still be performed with other colors.

❏

The media is transparent or colored.

❏

2.5 is selected for Platen Gap in the setup menu. Choose another option for Platen 
Gap.

If the printer is exposed to direct sunlight or interference from other ambient light sources, 
Auto Nozzle Check may not work. Shade the printer from sources of interference.

Summary of Contents for SureColor S50675
































































































































































































































































Reviews:

No comments

Related manuals for SureColor S50675

Ioline Summit Manual To Operations preview
Summit
Brand: Ioline Pages: 75
Canon imagePROGRAF TM-200 Online Manual preview
imagePROGRAF TM-200
Brand: Canon Pages: 930

Brands by name

Popular brands

Load more brands