manualshive.com logo in svg

Epson SureColor S50675, User Manual

The Epson SureColor S50675 is a high-quality large-format printer that combines speed, precision, and vibrant color reproduction. To make setup and operation a breeze, be sure to download the free Quick Reference Manual from our website to access detailed instructions and optimize your printing experience.

Share
Download
background image

Introduction

24

:

Ink is low. You need to prepare a new ink cartridge.

:

The level of ink remaining has reached the limit; replace with a new cartridge. When using spot 
color inks, replace the ink cartridge promptly. If the old cartridge is not replaced, the print head 
or other parts may be damaged.

:

The ink cartridge is not locked. Lower the lock lever to engage the lock.

:

No ink cartridge is inserted. Insert the ink cartridge and lower the lock lever to engage the lock.

:

An error occurred. Check the message on the screen, and clear the error.

:

A cleaning cartridge is installed. The height of the indicator shows the amount of cleaning liquid 
remaining in the cartridge in three levels.

Note:
You can also check the level of ink remaining using the Ink Level option in the menus. See “The 
Ink Level Menu” on page 212.

2 Ink color codes

BK

: Black

Y : Yellow

M : Magenta

C : Cyan

MS

Metallic Silver

LK

Light Black

OR+

Orange Plus

LC

Light Cyan

LM

Light Magenta

WH

White

6 Waste ink bottle status

Displays the approximate amount of space available in the waste ink bottle. The display changes as shown below when the 
waste ink bottle is nearly full or an error occurs .

Normal

Warning or error

Summary of Contents for SureColor S50675
































































































































































































































































Reviews:

No comments

Related manuals for SureColor S50675

Brands by name

Popular brands

Load more brands