manualshive.com logo in svg

Epson SureColor S50675, User Manual

The Epson SureColor S50675 is a high-quality large-format printer that combines speed, precision, and vibrant color reproduction. To make setup and operation a breeze, be sure to download the free Quick Reference Manual from our website to access detailed instructions and optimize your printing experience.

Share
Download
background image

Maintenance

183

3. Cut media as necessary, and inspect the nozzle patterns.

Example of clean nozzles:

The pattern contains no gaps.

Example of clogged nozzles:

Perform head cleaning if any segments are missing from the pattern. See

 

“Head 

Cleaning” on page 183.

4. The menus close when printing is complete.

To print the post-cleaning test pattern in the space beside an existing pattern, press the 

u

 button to rewind the media until the print start position is aligned with the pressure 

rollers.

Head Cleaning

Should the nozzle pattern contain faint or missing segments, you may be able to unclog the 
nozzles by cleaning the print head as described below.

There is no need to clean the head if the print result does not contain faint areas or other 
color problems.

Important:
Always remove clogs from the nozzles of all colors before resuming use. If clogged 
nozzles remain when printing (including clogged nozzles for colors that are not used), the 
clogs can no longer be removed.

Summary of Contents for SureColor S50675
































































































































































































































































Reviews:

No comments

Related manuals for SureColor S50675

Gerber P2C 1200 Site Preparation And Planning preview
P2C 1200
Brand: Gerber Pages: 7
Gerber P2C 1600 User Manual preview
P2C 1600
Brand: Gerber Pages: 76

Brands by name

Popular brands

Load more brands