manualshive.com logo in svg

Epson SureColor S50675, User Manual

The Epson SureColor S50675 is a high-quality large-format printer that combines speed, precision, and vibrant color reproduction. To make setup and operation a breeze, be sure to download the free Quick Reference Manual from our website to access detailed instructions and optimize your printing experience.

Share
Download
background image

Maintenance

196

❏

Apply the grease to the pad at the end of the grease tool.

7. Hold the grease tool against the secondary carriage rod and smoothly slide it twice from 

one end to the other and back again as shown in Step 3.

8. Remove the stained pad, and then store the grease tool with the grease.

When disposing of used pads, cleaning sticks, and other items used to apply grease, 
see “Disposal of Used Consumables” on page 179.

❏

Replace the cap to prevent foreign objects falling into the grease.

❏

Store the container at room temperature with the cap uppermost in a location that is 
not exposed to direct sunlight.

Summary of Contents for SureColor S50675
































































































































































































































































Reviews:

No comments

Related manuals for SureColor S50675

Brands by name

Popular brands

Load more brands