Epson SureColor S50675 User Manual Download Page 187

Page: 187 / 255

Maintenance

187

Eight cartridges are required, excluding the two attached cartridges.

The number enclosed in parentheses indicates the number of required cartridges when Head1 All
Nozzles or Head2 All Nozzles is selected.

Head Washing procedure

1. After confirming that the printer is ready, press the

button.

The Maintenance menu will be displayed.

2. Use the

buttons to select Head Washing, and press the

button.

3. Use the

buttons to select any mode, and press the

button.

Product name

Color mode

Cartridges

S70675

10 Color

9 Color

8 Color (unfixed)

8 Color (fixed)

S50675

5C Mode

10 (5)

4C Mode

8 (4)

S30675

Important:
If the amount of remaining ink or cleaning fluid is insufficient, the function may not run. When
there is an insufficient amount remaining, have new cartridges on hand as a precaution.

Summary of Contents for SureColor S50675
































































































































































































































































Search results

Summary of Contents for SureColor S50675

Reviews:

Related manuals for SureColor S50675

Brands by name

Popular brands

Epson SureColor S50675, User Manual

Search results

Summary of Contents for SureColor S50675

Reviews:

Related manuals for SureColor S50675

Brands by name

Popular brands