Epson ACULASER COLOR 1000, Service Manual

Page: 24 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Product Descriptions Controller Unit Specifications 24
Printing Area
†
Maximum printable area:Width 208mm/Length 289mm
†
Guaranteed printing area
Maximum guaranteed printing area:Width 208mm/Length 289mm
Entire paper area except for a 4mm margin at each edge of the paper up to
the above size. (See the figure below.)
Figure 1-1. Printing Area
1.2.5 Sensors
Photoconductor Unit
Guaranteed
Printing Area
4mm
4mm
4mm
4mm
Table 1-7. Sensor Specifications - Photoconductor Unit
Detected
Conditions
Detection Method Comments
Mounted/
unmounted Electrical contact detection
method
---
New product
Fuse method (Cut fuse in new
product)
---
Mounted/
unmounted
detection at
powering on
Electrical contact detection
method
• Can be mounted/unmounted
while power is on
• No damage on mechanism
• Status is updated when the cover
is closed
Consumption
Calculate operating time
(motor rotation time)
Added up in 30 sec. unit
Near end
The total operating time of the
main motor
2640counts x 30sec. = 1320min.
End of life
The total operating time of the
main motor.
3300counts x 30sec. = 1650min.
Printing is forbidden in the following
timing
• While printing of up to 100
images(300sec.) is performed
after the End of life detection
• After printing completed.
Genuine SEC
product
Un-compatible rib ---