Epson ACULASER COLOR 1000, Service Manual

Page: 167 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Disassembly and Assembly Disassembling Procedure 167
4.2.19.7 Rack Removal
1. Remove the Rear Controller Cover. (See “Rear Controller Cover Removal”
on page -145.)
2. Remove the Rear Cover. (See “Rear Cover Removal” on page -146.)
3. Remove the PU1 Support Plate. (See “PU1 Support Plate Removal” on
page -154.)
4. Remove the Developer Motor Assy. (See “Developer Motor Assy.
Removal” on page -166.)
5. Remove the Left Frame Plate. (See “Left Frame Plate Removal” on
page -172.)
6. Remove the Toner Empty Sensor. (See “Rear Cover Removal” on
page -146.)
7. Remove the Front Side Rack Bearing. (See “Front Side Rack Bearing
Removal” on page -164.)
8. Remove the Rack Lock Lever. (See “Rack Lock Lever Removal” on
page -165.)
9. Remove the Rack Black Position Sensor. (See “Rack Black Position
Sensor Removal” on page -165.)
10. Remove the Developer Motor Assy. (See “Developer Motor Assy.
Removal” on page -166.)
11. Remove the Rear Rack Bearing. (See “Rear Rack Bearing Removal” on
page -166.)
12. Press the rack release button from the front side. (You can also release the
E ring of the Rack Release Lever to release the Lever.)
13. Pull the Rack to the front and remove it. Be careful not to hang the rear
end.
Figure 4-49.
Rack Remova
l