Epson ACULASER COLOR 1000, Service Manual

Page: 161 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Disassembly and Assembly Disassembling Procedure 161
4.2.16 Paper Cassette
4.2.16.1 Paper Size Switch Removal
NOTE: If the optional 500 Sheet Paper Cassette Unit is installed, remove
it.
1. Prepare the thick buffer and lay the printer there on its left side down.
2. Release the fixing tab for the Paper Size Switch.
3. Disconnect the harness from the connector on the sensor.
Figure 4-38.
Paper Size Switch / Paper Near Empty Sensor Removal
4.2.16.2 Paper Near Empty Sensor Removal
1. Prepare the thick buffer and lay the printer there on its left side down.
2. Release the fixing tab for the Paper Near Empty Sensor.
3. Remove the harness from the connector on the sensor.
4.2.16.3 Cassette Paper Load Solenoid Removal
1. Remove the Rear Controller Cover. (See “Rear Controller Cover Removal”
on page -145.)
2. Remove the Rear Cover. (See “Rear Cover Removal” on page -146.)
3. Remove the PWB-B Support Plate. (See “HV2 (High Voltage Board)
Removal” on page -152.)
4. Remove the MP Tray Paper Load Unit. (See “MP Tray Paper Load Unit
Removal” on page -160.)
5. Remove 1 screw securing the support plate and remove the Paper Load
Solenoid. (See Figure 4-38, "Paper Size Switch / Paper Near Empty
Sensor Removal")