Epson ACULASER COLOR 1000, Service Manual

Page: 14 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Product Descriptions Overview 14
„
Resolution
5. ROM update function (RCC compatible) when a Flash DIMM is installed.
6. Euro symbol supported
7. HDD (optional) can be installed
<AcuLaser C1000>
†
Host-based controller
„
CPU TMPR4955AF-200 MHz
„
Standard RAM is 16 MB. Adding RAM DIMM expands to a maximum
of 256 MB (128 MB x 2 with the standard RAM replaced with 128 MB
RAM)
†
Color technologies
„
Enhanced ASIC (VIPS) installed
„
CPGI and CRIT (color RIT) installed
†
Two types of standard interfaces installed
„
IEEE1284 compatible parallel interface supporting ECP
„
USB I/F
†
By expanding memory with RAM DIMMs, the following functions can be
enhanced and speeded up.
„
CPGI drawing area
„
Print Speed
„
Resolution
Software Features
<AcuLaser C2000>
1. Color technologies
„
ESC/Page-Color supports B/W printing. (Speeded up in automatic
discrimination of color and B/W.) (TBD)
„
Smooth expanding of color images by ESC/Page-Color. (TBD)
„
Automatic color adjustment. (at powering on / when cover is closed
(excludes paper jam) / at a time after 24hours passed or 100 pages
printed since color adjustment have been done previously and
returning from standby )
2. Job management (TBD)
Printing status confirmation and job cancel are enabled for job printed from
built-in network by EPSON Direct Print and internal network.
3. Through bi-directional EJL and MIB, the printer status and printer
environment are monitored.
4. Remote panel function through a Web browser (compatible with Java
JDK1.1).
5. When a HDD (option) is installed, electronic sorting, I/F reception buffer
expansion (only for Ethernet I/F) and font registration when PostScript3
mode can be equipped.
6. Additional built-in fonts
Euro Symbol supported. NLSP Bitmap3 Plus is installed in the main unit
font ROM. PcLit771 is added.
7. Installed emulations
„
Standard: ESC/Page-Color, PCL5e(B/W), GL-Like(B/W),
FX(B/W), ESCP2(B/W), I239X(B/W), ESC/
Page(B/W)
„
Options: Adobe Postscript Level3(Kent-Color)
„
Other: -EJL, PJL mode
-RCC mode (firmware update)
-MCU update mode (mechanical-controller
firmware update)
-DIAG Mode (engine configuration)