Epson ACULASER COLOR 1000, Service Manual

Page: 123 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Troubleshooting Printer Message 123
†
uuuu Toner Low (uuuu = CMYK, only cartridges near end are displayed)
Worn Photoconductor
Waste T Box Nearfull
Worn Fuser
Oil Roll Near Empty
Worn Transfer Belt
Description: These warnings indicate that consumables should be
replaced soon.
For toners, they also indicate which of CMYK toners have
to be replaced.
The warnings related to consumables will be cleared when
the status of end or near end is not detected any longer.
The ResetFlag command of the ESCPAGES-02 protocol
also clears the warning.
However, a function to clear the warnings for consumables
from the EPSON Status Monitor is not supported.
Each consumable can be used until the status changes to
the replace error, but it is desirable to replace it when the
warning appears.
Remedy: After printing, the EPSON Status Monitor pop-up appears,
but this display will disappear when the [Close] button is
clicked or the relevant consumable is replaced.
“Other warnings = OFF” can be selected in the Monitoring
Preferences settings of the EPSON Status Monitor.
3.2.5 Service Call Error Messages
There are two types of service call errors; engine related and controller related
ones, as shown in the following sections.
3.2.5.1 Engine Related Service Call Error Messages
<AcuLaser C2000>
Table 3-6. Engine Related Service Call Error Messages
(AcuLaser C2000)
Error
Category e
Error Code
fff
Explanation
E 004 (2-4) Engine board malfunction
E 008 (2-8) Main motor malfunction
E 009 (2-9) Fuser motor malfunction
E 011 (2-11) Transfer Belt fan malfunction
E 012 (2-12) Power supply cooling fan malfunction
E 013 (2-13) Inside cooling fan malfunction
E 014 (2-14) Suction fan malfunction
E 015 (2-15) Fuser fan malfunction
E 016 (2-16) Polygon motor malfunction
E 018 (2-18) Laser malfunction
E 020 (2-20) 2nd transfer roller gap control malfunction
E 021
(2-21) Transfer Belt Cleaner gap control
malfunction
E 022 (2-22) Transfer Belt rotation malfunction
E 023 (2-23) Toner cartridge rack malfunction
E 024 (2-24) Heater roller heating malfunction
E 025 (2-25) Heater roller low temperature malfunction