Epson ACULASER COLOR 1000, Service Manual

Page: 58 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Product Descriptions About RAM Expansion 58
1.6 About RAM Expansion
With AcuLaser C2000 / AcuLaser C1000, if there is insufficient memory, the
following errors occur.
„
Mem Overflow
„
Image Optimum
„
Need Memory
„
Duplex Mem Overflow
„
Print Underrun (not applicable to AcuLaser C2000)
In these cases, it may be possible to overcome the problem by one of the
following methods.
1. Set the resolution on 300 dpi in the case of B/W printing.
2. If printing with color is set, change the compression format (lossy
compression )
3. Make the receiving buffer size smaller.
4. Set an I/F which is not used to OFF.
However, in order to definitely avoid problems with insufficient memory, it is
necessary to install more memory.
C H E C K
P O I N T
There is no interchangeability between the expansion RAM
for AcuLaser C2000, which is a 168-pin type, and that for
AcuLaser C1000, which is the dedicated 90-pin type.