Epson ACULASER COLOR 1000, Service Manual

Page: 28 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Product Descriptions Controller Unit Specifications 28
Figure 1-2.
Printing Start Position Accuracy/Paper Skew Descriptions
Serviceability
MTTR 30 minutes max. (average)
(Time for service technician to locate and repair a failure.)
Output Paper Curl Height (with A4/LT)
†
Plain paper: ± 30mm max. (same as for duplex printing)
†
Transparencies: ± 15mm max.
(For non-aligned B/W printing with 5% image occupation rate or color printing
with 5% image occupation
1.2.7 Operating Conditions (Including
Consumables)
Temperature and Humidity
†
Temperature: 10 to 35°C
†
Humidity: 15 to 85% RH no condensation
Barometric Pressure (Altitude)
760 hPa min. (2,500 m max.)
Levelness
Max. 1° tilt (front-rear or left-right)
Illumination
3,000 lux max. (no direct sunlight)
Printer Peripheral Space (TBD)
Maintain the space shown in the diagram below around the printer to ensure
normal printer operation. (Units: mm)
Paper skew
Main Scanning Direction
(c-a)
±1.5 mm
±2.5 mm
(TBD)
Sub Scanning Direction
(a-b)
±2.0mm
±3.5 mm
(TBD)
*1: With A4/LT
Table 1-17. Printing Start Position Accuracy/Paper Skew
*1
Directions
Single-sided
printing
Duplex
printing
Guaranteed
Printing Area
b
c
a
d
e
f
Paper feed direction