Epson ACULASER COLOR 1000, Service Manual

Page: 66 / 230

EPSON AcuLaser C2000 / AcuLaser C1000 Revision E
Product Descriptions Differences in Jumper Settings between Intended Markets 66
1.11 Differences in Jumper Settings between Intended Markets
For AcuLaser C2000 / AcuLaser C1000, the following settings are made
according to intended markets. Settings are determined at the factory because
of use of jumper resistance.
<AcuLaser C2000>
<AcuLaser C1000>
Table 1-41. Jumper Setting (IPO0)
RJ0 SW3-1 Built-in Network
Not installed OFF 1 Used
Installed ON 0 Not used
Table 1-42. Jumper Setting (IOP3)
RJ3 SW3-2 Birstream Font
Not installed OFF 1 Used
Installed ON 0 Not used
Table 1-43. Jumper Setting (INPT5)
RJ4 SW3-3
Not installed OFF 1 OEM
Installed ON 0 Brand
Table 1-44. Pattern Jumper (INPT3)
JP101 Intended Markets
Open 1 Other than Japan
Short 0 Japan
Table 1-45. Pattern Jumper (INPT1)
JP101 Default Setting for MP Tray Paper Size
Open 1 A4
Short 0 LT
Table 1-46. DIC Jumper Switch (INPT7)
JP102 Parallel Interface Receive Mode
Open 1 Nibble
Short 0 ECP