Epson 900N, Service Manual

Page: 141 / 201

EPSON Stylus COLOR 900/900N Chapter 5 Adjustments
138
5.2.6 Bi-Directional Adjustment
You need to perform the bi-directional adjustment if:
„
You remove or replace the printhead.
„
You replace the main board.
„
You replace an old PROM (version TEE01A, 01B, or 01C) with a
new one (TEE01D or later).
„
You notice that vertical lines appear staggered or misaligned.
5.2.6.1 Printing the Bi-D Adjustment Pattern
Follow these steps to print the Bi-D adjustment pattern and check the
current settings:
1. Perform the actions described in “Starting the Adjustment
Program” on page 122. You see the main menu:
Table 5-9. Main Menu
2. Select Adjustment 2 and press Enter. The following screen
appears:
Figure 5-28. Adjustment 2 Menu
NOTE: If you initialize the EEPROM (see Table 1-22 on page 28),
the Bi-D adjustment value is not erased and you don’t have
to perform a Bi-D adjustment as with previous models.
C A U T I O N
The Bi-D adjustment is always the last adjustment you should
make. Never perform other adjustments, such as the
printhead ID input or the printhead angular adjustment, after
changing the Bi-D adjustment values.