Mycom S CPM 153
5 Operation
Hauser
21
5.1.3
Open measuring menus
You can choose between the different measuring menus. Use the arrow keys to scroll
between the different menus. Switch between the measured value characteristic and
the data logger using the ENTER key
F
.
"MEAS" switches to Operation. This displays the measured values. Use the arrow
keys to scroll through the different measuring menus.
!
Note!
Press "MEAS" to exit any of the "PARAM", "DIAG", "CAL" menus without terminating the
settings / calibration.
"CAL" switches to the calibration menu of the electrodes.
F
(Enter) moves you one step forward in a menu or confirms a selection you made.
LED is
green: everything OK.
red: an error has occurred.
• You can scroll through the menu options with the arrow keys, and then highlight
your selection (if there is a choice offered)
or
• Increment or decrement numbers by one step with "+" / "-".
Move to the next digit with the "right arrow" (editor type 1) or
• "Activate" with the "right arrow" and scroll through the selection with "+" / "-"
(editor type 2) (for information on editor types, see page 23).
W
V
W
V
The current measured value of
Circuit 1 is displayed.
If you have activated the data logger,
you can see the current measured
value characteristic here (record
mode).
If you have activated both data log-
gers, press the arrow key to switch to
the view of the second measured
value characteristic.
With an active data logger, you can
open the recorded measured values
by pressing the ENTER key (Scroll
mode).
W
V
W
V
W
V
With a two-circuit device, in this
measuring menu you can see both
measured values next to each other
and their corresponding temperatures.
With a one-circuit device, you can
therefore only see one measured value
with its temperature.
In this measuring menu, with a two-
circuit device, you can display the
measured value difference and their
temperatures.
In this measuring menu, you can see
the current and voltage values and the
contact states of the relay at a glance.
Active relay =
■
(with function)
Inactive relay =
❒
7.54
pH
Select
Measure
2.00
pH1
12.00
Measure
Select
2.00
pH1
7.54
12 15 35
01 04 2001
12.00
Measure
Select
7.00
7.54
ATC 1
ATC 2
pH 1
pH 2
41.6°C
25.0°C
Select
Measure
∆
pH
-0.54
ATC 1
ATC 2
41.6°C
25.0°C
Select
Measure
pH 7.0
0 mV
pH 7.54
-32 mV
Rel. A
1
2
3
4
5
Out
1
22.00 mA
Out
2
22.00 mA
Select
Measure
