5 Operation
Mycom S CPM 153
24
Hauser
5.1.7
Factory setting
All the factory parameters are active when the instrument is switched on for the first time.
The table below lists all the main settings. For all further factory settings, refer to the
description of the function groups (from page 31), there the factory setting is printed in
bold
.
5.2
Replaceable memory
The DAT module is a memory device (EEPROM) which is pluggd into the connection
compartment of the transmitter. Using the DAT module you can
•
save
the complete settings, the logbooks and the data logger of the CPM 153 and
•
copy
the complete settings to other CPM 153 measuring transmitters with have
identical hardware functionality.
This considerably reduces the effort to install or service several measuring points.
Parameter
One-circuit instrument
Two-circuit instrument:
Select operating mode
pH
pH
Select measuring principle
One-circuit Circuit 1
One-circuit Circuit 1
Select two-circuit measurement
–
Two-circuit
Select electrode type 1
Glass electrode 7.0
Glass electrode 7.0
Select electrode type 2
–
Glass electrode 7.0
Select connection type
symmetrical
symmetrical
Select temperature display
Deg. C
Deg. C
Select temperature compensa-
tion circuit 1
ATC K1
ATC K1
Temperature measurement K 1
off
off
Select temperature
compensation circuit 2
–
ATC K2
Temperature measurement K 2
off
off
Select temperature sensor
Pt 100
Pt 100
Contact functions
NAMUR
NAMUR
Select current output 1
pH/redox K1
pH/redox K1
Select current output 2
Temperature K1
pH/redox K2
Hold
active with PARAM and CAL
(inactive with DIAG)
active with PARAM and CAL
(inactive with DIAG)
Current
output 1:
0/4 mA value:
20 mA value:
pH 2 / –1500 mV / 0,0 % / 0,0 °C
pH 12 / +1500 mV / 100,0 % /
100,0 °C
Circuit 1:
pH 2 / –1500 mV / 0,0 % / 0,0 °C
pH 12 / +1500 mV / 100,0 % /
100,0 °C
Current
output: 2
0/4 mA value:
20 mA value:
Temperature Circuit 1:
0,0 °C
100,0 °C
Circuit 2:
pH 2 / –1500 mV / 0,0 % / 0,0 °C
pH 12 / +1500 mV / 100,0 % /
100,0 °C
