Gammapilot M FMG60 FOUNDATION Fieldbus
Operation
Hauser
39
Selection and configuration in the operating menu:
• Switch from the measured value display to the
Group selection
by pressing
• Press or to select the desired
Function group
and confirm with
The
mark in front of the menu text indicates the active option
• Press or to activate the Edit mode
Selection menus
– Select the required parameter in the
function
selected with or
– confirms the selection; the
mark appears in front of the selected
parameter
– confirms the edited value; the system quits the Edit mode
– Pressing and simultaneously will cancel the selection; the system quits the Edit
mode
Entering numerals and text
– Press or to edit the first character of the numeral/text
– positions the cursor at the next character; continue with and until the entire
value has been entered
– If the
symbol appears at the cursor, press to accept the value entered; the
system quits the Edit mode
– If the
symbol appears at the cursor, press to return to the previous
character
– Pressing and simultaneously will cancel the selection; the system quits the Edit
mode
• Press to select the next function
• Press and simultaneously once to return to the last
function
Press and simultaneously twice to return to the
group selection
• Press and simultaneously to return to the
measured value display
6.3
Alternative operation options
As an alternative to local operation, the measuring device can also be configured and
measured values obtained via the FOUNDATION Fieldbus protocol. Two options are
available for operation:
• Operation via the FieldXpert SFX100 handheld terminal
• Operation via a personal computer (PC) using the FieldCare operating program
The device can also be operated locally using the keys. If operation is locked by locking
the keys locally, parameter entry via communication is not possible either.
6.3.1
Operation via Field Xpert SFX100
Compact, flexible and robust industrial handheld terminal for remote configuration and
measured value interrogation via the HART current output or FOUNDATION Fieldbus. For
details refer to
BA00060S/04/EN
6.3.2
Operation with FieldCare
FieldCare is an Hauser asset management tool based on FDT technology. With
FieldCare you can configure all Hauser devices as well as devices from other
manufacturers that support the FDT standard. Hardware and software requirements can
be found on the Internet:
www.de.endress.com -> Search: FieldCare -> FieldCare ->Technical data
