Gammapilot M FMG60 FOUNDATION Fieldbus
Installation
Hauser
23
1
A0023205
1
Cylinder screws
L
CAUTION
Consider the following when using the water cooling jacket
‣
It is recommended to ground the water cooling jacket separately at the protective
ground connection provided for this purpose.
‣
The ambient temperature of the terminal housing may not exceed 75 °C (167 °F). This
also applies if water cooling is used.
‣
The three screws (see graphic below) connecting the detector pipe to the terminal
housing may
not
be opened.
A0018068
3
The three screws connecting the detector pipe to the terminal housing may not be opened.
4.3.1
Mounting position and position of the cooling water nozzles
A
B
C
1
1
2
1
2
2
A0018079
A
Recommended mounting position for level measurement: the terminal housing is at the bottom
B
In exceptional cases (e.g. shortage of space) the terminal housing may be located at the top
C
Mounting position for point level detection and density measurement
1
Cooling water inlet (always at bottom)
2
Cooling water outlet (always at top)
