Operation
Gammapilot M FMG60 FOUNDATION Fieldbus
44
Hauser
Default (as-delivered) block configuration
The input and output variables of individual blocks can be interconnected by a network
configuration tool (e.g. NI-Fieldbus Configurator). The block model below shows how
these connections are set in the default (as-delivered) state.
OUT
OUT
Physical Block
Display
Sensor
Transducer
Block
Analog Input
Function Block 1
Analog Input
Function Block 1
PID Block
Primary value
Secondary value
Third value
A0018673
Function block
Description
Sensor
Signal evaluation
Physical block
Device-specific properties, e.g. tag name
PID block
Automation functions
Transducer block
Parameters that describe the device e.g. calibration, linearization etc.
Primary value
Main value
Secondary value
Pulse rate
Third value
Temperature
Analog Input function block 1
Parameters for processing the measured variable, e.g. scaling, status
Analog Input function block 2
Parameters for processing the measured variable, e.g. scaling, status
6.6.5
Resource block
E+H_GAMMAPILOT_M_XXXXXXXXXXX
.....
RESOURCE_XXXXXX (RB2)
.....TRANSDUCER_XXXXXX (TBUL)
.....ANALOG_INPUT_1_XXXXXX (AI)
Operation
The Resource block contains the parameters that describe the physical resources of the
device. It does not have an input or an output. The Resource block is opened by clicking the
"Resource" line. If the NI-FBUS Configurator is used, a list of files is now displayed in which
the parameters can be viewed and edited. A description of the parameters is also
displayed. A parameter change can be saved by clicking the WRITE CHANGES button when
the block is not in service (Automode). Click the READ ALL button to check all the values
saved in the device.
