Gammapilot M FMG60 FOUNDATION Fieldbus
About this document
Hauser
7
1
About this document
1.1
Document function
These Operating Instructions contain all the information that is required in various phases
of the life cycle of the device: from product identification, incoming acceptance and
storage, to mounting, connection, operation and commissioning through to
troubleshooting, maintenance and disposal.
1.2
Symbols used
1.2.1
Safety symbols
Symbol
Meaning
DANGER
DANGER!
This symbol alerts you to a dangerous situation. Failure to avoid this situation will
result in serious or fatal injury.
WARNING
WARNING!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in serious or fatal injury.
CAUTION
CAUTION!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in minor or medium injury.
NOTICE
NOTE!
This symbol contains information on procedures and other facts which do not
result in personal injury.
1.2.2
Electrical symbols
Symbol
Meaning
Direct current
A terminal at which DC is present or through which DC flows.
Alternating current
A terminal to which alternating voltage (sine-wave) is applied or through which alternating cur-
rent flows.
Ground connection
A grounded terminal which, as far as the operator is concerned, is grounded via a grounding sys-
tem.
Protective ground connection
A terminal which must be connected to ground prior to establishing any other connections.
1.2.3
Tool symbols
Symbol
Meaning
Flat blade screwdriver
Allen key
