Installation
Gammapilot M FMG60 FOUNDATION Fieldbus
16
Hauser
4
Installation
4.1
Incoming acceptance, product identification,
transport, storage
4.1.1
Incoming acceptance
Check the packaging and contents for any signs of damage. Check the shipment, make
sure nothing is missing and that the scope of supply matches your order.
4.1.2
Product identification
The measuring device can be identified in the following ways:
• Using the nameplate specifications.
• Using the order code with a breakdown of the device features on the delivery note.
• By entering the serial number of the nameplates into
W@M Device Viewer
.
(www.endress.com/deviceviewer): All the information about the measuring device is
displayed.
For an overview of the scope of the Technical Documentation provided:
Enter the serial number of the nameplates into
W@M Device Viewer
. (www.endress.com/
deviceviewer)
4.1.3
Transport
L
CAUTION
Risk of injury
‣
Follow the safety instructions and transport conditions for devices weighing more than
18 kg (39.69 lb).
4.1.4
Storage
Pack the device so that it is protected against impact for storage and transport. The
original packaging provides optimum protection. The permissible storage temperature is:
• –40 to +50 °C (–40 to +122 °F) for devices with PVT scintillator
• –40 to +60 °C (–40 to +140 °F) for devices with NaI crystal
4.2
Installation conditions
4.2.1
Dimensions, weight
Gammapilot M (without water cooling jacket)
160x190
(6.3x7.48)
ø120
(4.72)
ø80
(3.15)
537 (21.14)
mm (in)
A
B
A0018072
