Gammapilot M FMG60 FOUNDATION Fieldbus
Operation
Hauser
43
The device ID consists of the following parts:
Device_ID = 452B481013-XXXXXXXXXXX
where:
452B48
ID code for Hauser
1013
ID code for Gammapilot M
XXXXXXXXXXX
Device serial number as printed on the nameplate.
Right-clicking the name opens up a menu in which the PD_TAG and NODE_ADDRESS can
be changed.
Clicking the name expands the device tree and the device's function blocks are displayed:
E+H_GAMMAPILOT_M_XXXXXXXXXXX
.....RESOURCE_XXXXXX (RB2)
.....TRANSDUCER_GAMMA_XXXXXX (TBG)
.....DIAGNOSTIC_BLOCK_XXXXXX (DIAG)
.....DISPLAY_BLOCK-XXXXXX (DISP)
.....ANALOG_INPUT_1_XXXXXX (AI)
.....ANALOG_INPUT_2_XXXXXX (AI)
.....PID_XXXXXX(PID)
.....AR_XXXXXX (AR)
.....IS_XXXXXX (IS)
.....SC_XXXXXX (SC)
.....IT_XXXXXX (IT)
6.6.4
Block model of the Gammapilot M
The Gammapilot M has the following blocks:
•
Resource block (RB2)
See Operating Instructions BA00013S/04/EN: "Foundation Fieldbus - Overview"
•
Transducer block (TB)
Contains the parameters relevant to measurement
•
Diagnostic block (DIAG)
Contains the diagnostic parameters of the Gammapilot M
•
Display block (DISP)
Contains the parameters for configuring the display module VU331 (in the remote
display and operating unit FHX40)
•
Analog Input block 1 or 2 (AI)
Scale the output signals of the Transducer block and transmit them to the PLC
•
PID block (PID)
See Operating Instructions BA00013S/04/EN: "Foundation Fieldbus - Overview"
•
Arithmetic block (AR)
See Operating Instructions BA00013S/04/EN: "Foundation Fieldbus - Overview"
•
Input Selector block (IS)
See Operating Instructions BA00013S/04/EN: "Foundation Fieldbus - Overview"
•
Signal Characterizer block (SC)
See Operating Instructions BA00013S/04/EN: "Foundation Fieldbus - Overview"
•
Integrator block (IT)
See Operating Instructions BA00013S/04/EN: "Foundation Fieldbus - Overview"
