Gammapilot M FMG60 FOUNDATION Fieldbus
Basic safety instructions
Hauser
11
Source container
Document
FQG60
TI00445F/00/EN
FQG61, FQG62
TI00435F/00/EN
FQG63
TI00446F/00/EN
QG2000
TI00346F/00/EN
BA00223F/00/EN
Time
The time spent in the exposed area should be kept to a minimum.
Distance
Keep as far away from the radiation source as possible. The radiation intensity decreases
in proportion to the square of the distance from the radiation source.
2.6
Workplace safety
For work on and with the device:
‣
Wear the required personal protective equipment according to federal/national
regulations.
2.7
Operational safety
Risk of injury.
‣
Operate the device in proper technical condition and fail-safe condition only.
‣
The operator is responsible for interference-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers.
‣
If, despite this, modifications are required, consult with the manufacturer.
Repair
To ensure continued operational safety and reliability,
‣
Carry out repairs on the device only if they are expressly permitted.
‣
Observe federal/national regulations pertaining to repair of an electrical device.
‣
Use original spare parts and accessories from the manufacturer only.
Hazardous area
To eliminate a danger for persons or for the facility when the device is used in the
hazardous area (e.g. explosion protection, pressure vessel safety):
‣
Based on the nameplate, check whether the ordered device is permitted for the
intended use in the hazardous area.
‣
Observe the specifications in the separate supplementary documentation that is an
integral part of these Instructions.
2.8
Product safety
This measuring device is designed in accordance with good engineering practice to meet
state-of-the-art safety requirements, has been tested, and left the factory in a condition in
which it is safe to operate.
