71
Installation Manual
Inverter / PowerHub
3.3.5.7. POWERHUB 2 CONNECTIONS
There are different PowerHub 2 wiring instructions depending on whether the
battery is from ZN or Topband or whether the PowerHub 2 connection cable
is Rev. 1 or Rev 2. Pay attention below and follow the instructions for your
configuration. If unsure of your configuration see Appendix 5.1, "WHAT'S IN
THE BOX"
1. Locate the two cables coming from the right of the PowerHub 2 as
seen here and connect the larger four pin white connector into the
communications cable labeled “backup 24v” for ZN batteries and
“12Vdc” for Topband batteries. The other small black cable with the
four pin white connector will be eventually wired into the display
panel on the front cover of the enclosure.
