23
Installation Manual
Mounting System
3.2. MOUNTING SYSTEM
REQUIRED TOOLS AND EQUIPMENT
Before installing the battery enclosures, make sure nothing inside the
package is damaged. For a detailed list of materials supplied with the
PowerPod 2, reference Appendix 5.1 'What's in the Box'.
Below is a list of recommended tools and equipment you will need to
bring with you to install and troubleshoot the PowerPod 2:
PARTS NAME
Size
Description
Gloves
Automatic Screw Driver
#1 & #2 Phillips
Wrench
17 mm
Battery Enclosure Feet
Allen Wrench
4mm
Inverter Cover & bat-
tery cover
Allen Wrench
3mm
Auto-transformer
cover
Socket Nut Drive
1/2"
Lag Bolt Mounting
Bracket
Socket Nut Drive
10mm
Nuts for BMS, Batter-
ies & PE Wire
EQUIPMENT
FEATURES/FUNCTIONS
AC/DC True RMS Voltmeter
DC millivolts
DC volts
AC millivolts¹ True RMS
AC volts¹ True RMS
Lo-Z Auto volts
Example: Fluke 117
AC/DC Current Clamp Meter
DC Current 0.001 to 100 A.
AC Current 0.001 to 100 A.
Example: GTC CM100
CAUTION: Bearing capacity of the wall must be higher than
220lbs/100kg to safely support the inverter.
La capacité de roulement du mur doit être supérieure à 100
kg pour soutenir en toute sécurité l'onduleur
