29
Installation Manual
Mounting System / Inverter Installation
3.2.3. INVERTER INSTALLATION
1. Take out the template
which is to locate the
hole position of the wall
mounted bracket.
Fix the template on the
wall which is suitable for
installation of inverter.
Drill 7 holes on the wall
according to the size on
the template (8mm in
diameter, and 80mm in
depth).
CAUTION:
Avoid drilling holes in walls where existing cables
may exist inside or on the opposite side of the wall that may
be damaged.
Make sure the hole positions are aligned and level.
Évitez de percer des trous dans les murs où des câbles
existants peuvent exister à l'intérieur ou sur le côté opposé
du mur qui pourrait être endommagé.
Assurez-vous que les positions de trou sont horizontales et
verticales.
2. Use expansion bolts to fix the wall-mounted bracket onto the wall
tightly.
3. Carry the inverter by holding the heatsink on two sides and place
the inverter on the wall-mounted bracket.