140
Installation Manual
PowerPod 2 Limited Warranty
Warranty applies, we will, in our sole discretion, either 1) replace the
part or parts causing the Warranty claim, or replace the entire ESS
with a new or refurbished ESS, including shipping but excluding
installation, sufficient to return the ESS to a status at least equal to its
state prior to the cause of the Warranty claim being made (but not “as
new”), or 2) replace your PowerPod 2 with an equivalent or improved
product (new or refurbished) if PowerPod 2 parts or replacements is
not available at the time of the claim. This is your sole and exclusive
remedy for breach of this Warranty.
The remainder of the original Warranty period will apply to the
repaired or replacement product.
Terms and Conditions:
For the purposes of maintaining this Warranty certain terms and
conditions apply. Failure to comply with these terms and conditions
may, in Electriq’s sole determination, void or limit your rights under
this Warranty.
•
Installation must be by an appropriately licensed installer who
is also appropriately certified and trained by Electriq to install the
PowerPod 2. The installation must follow the manual, conform
to all local, state and other applicable building and safety codes,
be completed with a permit issued by the local authority having
jurisdiction, and be successfully commissioned. For a list of certified
installers contact us.
•
Temperature and Environment. Although the ESS is designed
to be rugged, it contains electronics, chemistries, and other
components that must be maintained within their certified limits.
The ESS may be installed inside or outside but:
•
Ambient temperature above 122F/50C and below 32F/0C may
damage the ESS and void this Warranty. Prolonged exposure
to direct sunlight (E.G. an unshaded south facing wall) may
cause internal temperature damage to the ESS and may void
the warranty.
•
Marine conditions (salty air or condensing humidity) may
cause corrosion or short circuits and shall void the Warranty.
•
Installation above 6,562 feet or 2000 meters may void this
Warranty.
•
Data Connection: Your ESS requires an internet connection
to properly operate. This connection is required for: 1) safety,
diagnostic and data reporting to Electriq about the state of the
ESS; 2) over-the-air software updates to keep your ESS operating in
its best capacity; and 3) for normal management and operations
of your ESS. If your ESS fails to connect to the internet for a period
