37
Installation Manual
Installing System / Conduit
3.3.2. CONDUIT
Install conduit and wire gutters between all mounted enclosures.
Take a picture of the conduit installation within the PowerTools
app and press 'Next' to proceed to the next step.
3.3.2.1. CONDUIT AND PLUGS
Inverter and auto-transformer are for conduit fittings of a diameter
of 1''. The main (10kWh) enclosure to add-on (5kWh) enclosures are
for conduit fittings of 2.0". An appropriate conduit adapter should be
applied when conduit fittings with different dimensions are used.
1. Remove the 4 screws by
Allen Wrench to remove
the cover of the connection
box.
2. Remove the waterproof
cover provided in the
hardware accessories box.
5mm, torque min. 2.1 max.
2.5 Nm (min. 1.5 max. 1.8
ft lb)
3. Insert the corresponding
conduit and fittings, then
fasten the joint.
4. Replace the cover.
Tighten screws to:
