Eiki MCD-100, Owner'S Manual

Page: 92 / 96

92
12. Appendix
■
Cannot start up Web Browser
Is connection between PC and the projector by using MCI Client established?
No........Check settings for Wireless/Wired LAN.
Yes ......Check settings of the proxy server at browser. Refer to "8. Configuration with
Browser" (P 41)
■
Although connection between PC and the projector is established by using
MCI Client, images are not projected on screen.
Make sure Wireless/ Wired is selected from the Input source menu of the projector.
■
Trying to use PJ Controller but correct operation window does not appear or
actual operation windows displayed are different from those on the owner's
manual.
Input correct model code at the initial setting for PJ Controller.
Refer to p64 in "10. PJ Controller".
Caution: Explanations about the operation and images contained in the owner's manual may differ from
actual ones as they are based on standard models. Read the owner's manual of the projector to
be used with the MCI before operation.
■
The projector cannot be turned on/off by operation with PJ Controller.
Make sure the settings of the projector are correct to use the MCI with it.
Refer to " Power and Status" in "10. PJ Controller".
■
Network Viewer does not work by the operation of the projector.
Make sure the settings of the FTP server are correct. You should set up the FTP server
before using Network Viewer. Refer to 11.Network Viewer.
■
Speed of playing back images are very slow.
When connecting on ad-hoc mode, check which wireless channel you are using.
If PC using the same channel as yours is existing closely, the networking speed may be
diminished or the communication unstable. Change channel to resolve the problem. The
channels of the MCI and MCI Client computer must be the same. Or adjust the compression
format at the optional setting from the PJ Controller menu.
Refer to "9. Display Image via Network".
■
MCI Client and the MCI are suspended and do not restart
Close the MCI Client application, turn off and unplug the projector. And then turn of the
projector again.
Caution: Do not remove the MCI from the projector while the Network Viewer is working.
It may lock MCI Client and the MCI leading to malfunction of them.