Eiki MCD-100, Owner'S Manual

Page: 70 / 96

70
10. PJ Controller
PC Adjustment
This feature optimizes the signal from the
connected computer to display the screen.
* PC Adjustment screen is displayed only when
Computer 2 (RGB) is selected for the input
source.
Parameter Description
Current Mode ..................Displays computer mode
Auto PC Adjustment ........Executed by clicking Start button.
Fine sync ..........................Click
7 8
to adjust the value
Total dots ..........................Click
7 8
to adjust the number to fit your computer image.
H Position ........................Click
7 8
to adjust the horizontal position.
V Position..........................Click
7 8
to adjust the vertical position.
Clamp................................Click
7 8
to adjust the clamp level.
Display Area H ..................Click
7 8
to decrease/increase the value to fit resolution of the image.
Display Area V ..................Click
7 8
to decrease/increase the value to fit resolution of the image.
Full Screen ........................Displays the image in the full screen size.
Load Setting No. ..............Loads the preset settings(Mode 1-5)
Save Setting No. ..............You can save the settings of the PC Adjustment. Select the mode number you
wish to save and click Set button.
※ If you want to delete the content in the mode. select the mode and click "Mode free" button.
Comment..........................You can save a not regarding the PC Adjustment. Click Save button to save the
note.