Eiki MCD-100, Owner'S Manual

Page: 86 / 96

86
11. Network Viewer
Operation from the projector
1. Configure the FTP server.
Configure the FTP server which provides image data, referring to "Operation from PJ
Controller" or "Operation from Web browser".
To operate the Network Viewer from the projector, the FTP server needs to be configured by PJ
Controller or web browser in advance.
Regarding the configuration of the FTP server, refer to "Operation from PJ Controller" or
"Operation from Web browser".
2. Select input source of the projector (Wired/Wireless)
Select "Wireless" for Wireless LAN and "Wired" for Wired LAN for the input source of the
projector.
3. Select Wireless Viewer or Wired Viewer from the MCI menu
Select "Wireless Viewer" when using wireless LAN or "Wired Viewer" when using wired LAN
from the MCI menu of the projector. Viewer Setting screen will appear.(See the next page)
4. Select Play Mode and execute the operation
Move the red arrow pointer to the item you wish to choose.
Using Point buttons and SELECT button of the projector, configure or execute each item.
Auto ........................Plays images and stop playing according to following configurations.
Second ....................Sets timing to switch images in Auto play mode. (3-240 sec.)
∽
............................Setting "On" makes the projector keep playing images repeatedly.
Times ......................Specifies the number of repeating times of auto play. (Maximum 255
times)
Manual ....................Switches images manually.
Press Point Up button on the projector (or the remote control) to show
next image and Point Down button to show the previous image.
Connect
Connect to the FTP server
..........................
Move the red arrow pointer to "Connect" and press SELECT button on
the projector (or the remote control) to connect the MCI to the FTP
server. Then the projector starts playing the images in the FTP server.
Disconnect from the FTP server
..........................
Move the red arrow pointer to "Disconnect" and press SELECT button
on the projector (or the remote control) to disconnect the MCI from the
FTP server.