Eiki MCD-100, Owner'S Manual

Page: 14 / 96

14
3. Operation of Multi Card Director
Since Screen-capture System - the system transmitting images on the computer screen to
projectors - is adopted, MCI can be used at various occasions free from software restrictions.
Below is a diagram showing the system transferring an image from a computer to projectors.
1. Use the exclusive software - MCI client - to load the computer screen in real-time.
2. The loaded image data will be compressed and transmitted to the MCI via wireless or wired
LAN. A single computer can transmit the image to up to five projectors.
3. MCI converts the transmitted image data into RGB digital signal and then output it to the DVI
input terminal of the projector.
* Since the image is being transmitted one by one, time-lag of the image projection will be occurred.
CAUTION
：
THIS SYSTEM IS NOT APPLICABLE TO AN APPLICATION
SOFTWARE USING DIRECTX, MS-OFFICE ASSISTANT,
AND REPLAYING OF MOTION PICTURES, SUCH AS DVD.
MCI System Block Diagram (Sample)
※ Below is a sample of wireless LAN block diagram. Image data can be transmitted to
projectors from Computer 1 or Computer 2.
0.0
0.5
1.0
1.5
2.0
0.0
0.5
1.0
1.5
2.0
0.0
0.5
1.0
1.5
2.0
Access Point MCI Client
Computer 1
MCI
MCI Client
Computer 2
Operation of Multi Card Director